Prepare all four canopy panels

Download the exact canopy template for your selected tent size. Upload a single-page PDF or JPEG into each slot: SideA, SideB, SideC and SideD. If artwork repeats, upload the same file to each matching slot. Each panel includes its roof section and valance; do not supply four small logo files.

  • 10ft × 10ft: use the 10ft canopy template for all four panels.
  • 10ft × 15ft: use the short-side template for A/C and the long-side template for B/D.
  • 10ft × 20ft: use the 20ft short-side template for A/C and long-side template for B/D. These guides are at 1:4 scale; preserve the supplied artboards. Raster artwork at quarter scale needs 600ppi to retain 150ppi at full size. Vector PDF artwork is preferred.

Keep full template artboards and scale unchanged. Follow shaped safe areas, seams and the template bleed boundary; extend backgrounds to its edge and add no extra bleed or crop marks. Delete background/mask/guide layers before exporting. Use CMYK, outline fonts, flatten images and convert spot colors. Use 150ppi at full size for raster artwork. Supplier limit: 300MB per file. We review panel fit before production.

Artwork for your selected walls

The uploader shows only the wall panels in your chosen setup, in addition to SideA–D for the canopy. Upload separate single-page PDFs or JPEGs for BackWall, FullSideLeft/FullSideRight or HalfSideLeft/HalfSideRight as shown. Upload the same file to both slots when both sides repeat the same design. Left and right are viewed from the open front of the tent.

  • 10ft back wall and all full sidewalls: use the full-size 10ft full-wall guide.
  • 15ft back wall: use the 15ft long full-wall guide at full size.
  • 20ft back wall: use the 20ft long full-wall guide at 1:2 scale. Raster artwork needs 300ppi at template scale to retain 150ppi at full size.
  • All half sidewalls: use the full-size half-wall guide. Full-size raster wall artwork needs 150ppi.

Wall templates include their own bleed and safe zones. Extend backgrounds to the supplied bleed boundary, keep important content inside the safe zone and remove guide layers before exporting. Preserve the complete original PDF artboard; add no extra bleed or crop marks. A complete canopy-and-wall design set must pass our prepress review before production.

Supported Format
Please upload jpg,jpeg,gif,png,eps,ai,pdf,zip,tar,rar,cdr,psd,svg,tiff,tif,avif,heic,heif images only
Supported Format
The uploaded file may not meet one or more required specifications. Please review, correct if necessary, and reupload.
*